Jetter Nozzle Selection

Nozzle Selection Nozzle selection requires you to look at the pressure and flow rate of your pump and the size of the pipes you intend to clear. Below is a chart giving guide lines to Nozzle size selection against the pipes that they are intended to work in (Fig 1.0) this is for our streamline jets for clearing blockages using this guide will help you get the most from your machine and labour. Nozzles used on small hoses like 3/8” or 1/2” give good accessibility in tight ubends and small pipes generally found in domestic work. Jetter hoses rom 3/4” up to 1” gives massive power for longer runs but due to the size and rigidity of the hose is not very effective at getting into ubends and corners found around most houses. Nozzles and hose diameter will also be restricted by the output of if your pump you have a high flow rate you will get sever pressure drop if the hose is too small if the hose is to big you lose accessibility and it will be too heavy to pull down the pipe not to mention the cost of buying the hose in the first place. Fig 2.0 gives a guide to hose selection vs hose diameter.

Nozzle & hose seliction charts.pdf

Download PDF • 103KB